SensaTank Marine 100 Tank Monitoring Kit
How many times have you asked the question, "When did we last dump the holding tank"? I’m sure I am not the first person to have a certain uneasiness about an unknown quantity of foul liquid on-board my vessel. It really is an age-old question that I finally put to rest last week by installing a SensaTank Marine 100 holding tank monitor. What this product does is externally measures how full three separate holding tanks are. There is one for Black (holding tank) one for Grey (shower/sink) and one for White (fresh water). You can use these monitors any way that you want. I set up mine to have two fresh water tanks, and one for the holding tank. The installation of this product was simple. You clean of your tanks (they recommend rubbing alcohol) and stick the four sensors on the outside of each holding tank that is to be monitored. This really is as easy is as peeling off the sticker on the back of the sensor and sticking them vertically, from top to bottom on the tank. A lead is run into each of the four sensors that are then led toward the unit. It really is plug and go. It works through sending a low impedance differential electrical field, and it really works! You will need a spare space on your electrical panel, and a place for a 3.5"H * 5.5 "W panel. It reads in 1/4 measurements and puts an end to the famous question, "How full is holding tank"? The montior and all wiring comes in one box and costs around 200.00 U.S and can be bought anywhere holding tanks are sold.
|
